Friday, May 8, 2009

Back to the Drawing Board




Last weekend, I mounted the rear tire back on its wheel, and so for the first time I was able to drop the bike off its centerstand to test the ground clearance (or lack thereof) of the battery tray. It doesn't look good. On the centerstand, the bike has about 5 inches of ground clearance. After dropping the centerstand, the bike's weight compresses the rear suspension, then I sat on the seat with my 180 lbs. The result is about 1-1.5" of clearance. That's a no-go in my book.
So... a little rearranging is in order.


The battery below the motor has got to move. I'm going to swap it with the motor controller. The battery will stick out further than the comtroller, but i don't think it will inhibit the function of the bike. Then the stack of 4 batteries in the front can all be moved up about 2.25 inches.

1 comments:

Unknown said...

So what IS considered adequate ground clearance??